Pioneer Circuits, Inc
Advanced Interconnection Solutions
Mil-Certifications
In Addition to building to IPC Class 2 and 3 standards, Pioneer Circuits maintains Military (DLA) certifications to the MIL-PRF-31032, MIL-P-50884, and MIL-PRF-55110 specifications.
MIL-PRF-31032/1, /2, /3, /4 Certified
This specification establishes the requirements for Quality System as well as fabrication requirements of Rigid, Flex, and Rigid- Flex PWB’s. This specification establishes the general performance requirements for printed circuit boards or printed wiring boards and the verification requirements for insuring that these items meet the applicable performance requirements.
The Specification is broken down into the following slash sheets as follows:
MIL-PRF-31032/1
-
Type 3 – Rigid multilayer board without blind or buried vias.
-
Type 4 – Rigid multilayer board with blind and/or buried vias.
MIL-PRF-31032/2
-
Type 1 rigid, (single sided) with or without plated–through holes, for soldered part mounting
-
Type 2 (double sided) with or without plated–through holes, for soldered part mounting
MIL-PRF-31032/3
-
Type 1 – Single-sided flexible printed board, with or without plated–through holes, with or without stiffeners, for soldered part mounting
-
Type 2 – double-sided flexible printed board, with or without plated–through holes, with or without stiffeners, for soldered part mounting
MIL-PRF-31032/4
-
Type 3 – Multilayer flexible printed board, multilayer, with plated–through holes, with or without stiffeners, for soldered part mounting
-
Type 4 – Multilayer rigid-flex printed board. multmultilayer, with plated–through holes, with or without stiffeners, for soldered part mounting
Mil-P-50884 Certified
This specification establishes the requirements for flexible printed-wiring (with or without shield (s) or stiffeners) and rigid and flexible printed-wiring combinations. The rigid and flexible printed-wiring combination is called a rigid-flex printed wiring board. In the rigid-flex application, the conductor layers that are in the flexible portion are also a layer in the rigid multilayer board.
The flexible and rigid-flex printed-wiring covered by this specification are organized in the following types and classes.
Types:
-
Type 1 – Singled-sided flexible material with or without shield (s) or stiffener (one conductor layer).
-
Type 2 – Double-sided flexible material with or without shield (s) or stiffener (two conductor layers) with plated-through holes.
-
Type 3 – Multilayer flexible material with or without shield (s) or stiffener (more than two conductor layers) with plated-through holes.
-
Type 4 – Multilayer rigid and flexible material combinations (more than two conductor layers), with plated-through holes.
-
Type 5 - Bonded rigid and/or flexible material combinations (more than one conductive layer) without plated-through holes.
Classes:
-
Class A - Capable of withstanding flexing during installation.
-
Class B – Capable of withstanding continuous flexing for a number of cycles specified on the master drawing. (Generally not used for more than two conductor layers).
MIL-PRF-55110F Certified
This specification establishes the qualification and performance requirements for rigid single -sided printed wiring boards, rigid double-sided printed wiring boards, and rigid multilayer printed wiring boards with plated through holes
Printed wiring boards shall be of the types shown
-
Type 1 – Single-sided board.
-
Type 2 – Double-sided board.
-
Type 3 – Multilayer board.
Quality System is certified to AS-9100 / ISO 9001:2008
-
Certificate No.: CERT-0057549
-
Expires May 21, 2015
Process Certification is to Nadcap AC7119/1 & /2
Certificate Number: 8324145796
Expiration Date: 31 October 2013